B9 · Boundary light below capacity, and layered boundaries

Let X be a finite set of boundary steps, Config X = 𝒫(X) and capacity X = |X| log 2, so that Hₛ d ≤ capacity X for every distribution d on Config X, with equality iff d is uniform (BoundaryBits.saturated_iff_uniform). Three hypotheses are declared as structures and shown satisfiable; the layer counting and the face of a full ball are proved outright. Read physically: each quantum is transparent, darkShare is the dark field it is made of, and it is black only at saturation; stacked layers of light fill the face, and the full face is the inverted quantum.

Definitions

NameContent
TorusWhiteBall.HWhiteBall Xa map darkShare on distributions over Config X with 0 < darkShare d ≤ 1, darkShare d = 1 if Hₛ d = capacity X, darkShare d < 1 if Hₛ d < capacity X; lightShare d = 1 − darkShare d
TorusWhiteBall.HCoreCollapse Xa real collapseMass and a map boundary : ℝ → ProbDistribution (Config X) with Hₛ (boundary M) = capacity X ↔ collapseMass ≤ M and 2.08 < collapseMass ≤ 3.2
TorusWhiteBall.chandrasekharSolarω₃⁰ √(3π) m_P³ / (2 (μ_e m_H)²) / M☉ with CODATA 2018 m_P, m_H, IAU 2015 M☉, ω₃⁰ = 2.01824, μ_e = 2
TorusLayers.face X Y dfor d on Config (X ∪ Y), the distribution of the face: each S ⊆ X weighs Σ_{T ∩ X = S} d T
TorusStack.HStack X εa sequence faceOf : ℕ → ProbDistribution (Config X) and ε > 0 with min (capacity X) (Hₛ (faceOf n) + ε) ≤ Hₛ (faceOf (n + 1)): each layer adds at least ε until the face is full
TorusLayers.layerSteps Cfor C ⊆ Fin (dx − 1), the union of the walls x = c | c + 1, c ∈ C, of T³ = dx × dy × dz

Results

StatementNameStatus
For X ∩ Y = ∅ and S ⊆ X: #{T ⊆ X ∪ Y : T ∩ X = S} = 2^|Y| TorusLayers.card_interiorsLean
Walls at c ≠ c' are disjoint; |layerSteps C| = |C| · dy · dz; for c ∉ C each face of the wall at c extends in 2^(|C|·dy·dz) ways TorusLayers.disjoint_planeSteps
TorusLayers.card_layerSteps
TorusLayers.card_interiors_torus
Lean
darkShare d = 1 ↔ d = uniform; 0 < lightShare d ↔ d ≠ uniform HWhiteBall.darkShare_eq_one_iff
HWhiteBall.lightShare_pos_iff
from HWhiteBall
For a family (W i, d i): (∀ i, 0 < lightShare (d i)) ↔ ∀ i, d i ≠ uniform; (∃ i, lightShare (d i) = 0) ↔ ∃ i, d i = uniform TorusLayers.lightShare_pos_iff
TorusLayers.exists_dark_iff
from HWhiteBall
Witness: darkShare = 1 − Ω_b (1 − Hₛ/capacity) satisfies HWhiteBall for 0 < Ω_b < 1, and lightShare ≤ Ω_b TorusWhiteBall.ofModel
TorusWhiteBall.ofModel_lightShare_le
Lean
1.43 < chandrasekharSolar < 1.44 TorusWhiteBall.chandrasekharSolar_gt
TorusWhiteBall.chandrasekharSolar_lt
Lean
0 < lightShare (boundary M) ↔ M < collapseMass; positive for M = 1.018 and M = 2.08, zero for M = 21.2 and M = 30 TorusWhiteBall.white_iff
TorusWhiteBall.siriusB_white, TorusWhiteBall.psrJ0740_white
TorusWhiteBall.cygnusX1_dark, TorusWhiteBall.thirty_dark
from both
Both hypotheses hold together on every nonempty X; instances on R³, T³ and the fibred box (across x and w) TorusWhiteBall.exists_white_and_dark
TorusWhiteBall.torus_exists
Lean
On T³, HWhiteBall (crossSteps) yields TorusSaturation.HSaturationDark TorusWhiteBall.toSaturationDarkLean
For X ∩ Y = ∅: face X Y uniform = uniform, a full ball shows a full face TorusLayers.face_uniformLean
The face of a full ball has lightShare = 0; if the face has lightShare > 0 the ball is not uniform; on T³ for the wall at c ∉ C TorusLayers.face_dark_of_full
TorusLayers.not_full_of_face_shines
TorusLayers.face_dark_torus
from HWhiteBall
min (capacity X) (n ε) ≤ Hₛ (faceOf n); if capacity X ≤ n ε then faceOf n = uniform HStack.min_le_entropy
HStack.full_of_le
from HStack
For n ≥ ⌈capacity X / ε⌉, lightShare (faceOf n) = 0; then every step of X is open with probability 1/2 HStack.dark_ceil
HStack.no_gradient
from both
The number of layers on the three topologies: ⌈dy·dz·log 2 / ε⌉ on R³, ⌈2·dy·dz·log 2 / ε⌉ on T³, ⌈3·dy·dz·log 2 / ε⌉ and ⌈2·dx·dy·dz·log 2 / ε⌉ on the fibred box TorusStack.dark_openCube
TorusStack.dark_torus
TorusStack.dark_fiberX, TorusStack.dark_fiberW
from both
HStack is satisfiable: one layer with ε = capacity X TorusStack.oneLayerLean
A full quantum is not a point: on a closed axis with d ≥ 2, a position eigenvector has Var T > 0 PlatformBlindness.variance_T_pos_of_P_eigenvectorLean

Figure

wall at c = dx − 2
–
|layerSteps C|
–
extensions of each face
–
lightShare (boundary M)
–

The counts in the readouts are the Lean values. The site intensities are the product state |Ψ(s)|² of the hopping H = −2t T° on each axis, and the colouring of the wall follows the sign of lightShare given by the hypotheses; for 2.08 < M < 3.2 the data do not fix collapseMass, and the page says so.

← B8Theorem atlasB9 of 9