B7 · Dirac operator / doubler modes

On T³ = ZMod a × ZMod b × ZMod c with even sizes put the closed transports T_x, T_y, T_z and the Kogut–Susskind signs A_y = (−1)^x T_y, A_z = (−1)^(x+y) T_z, ε = (−1)^(x+y+z). The massive operator is D_m = T_x + A_y + A_z + m ε. On T³ × w the fibre of three positions takes the place of the mass, D₄ = T_x + A_y + A_z + M_w with M_w = ε T°_w: its modes give the mass ½, a gap |E| ≥ ½ and, because the axes are closed, a speed limit 1/φ.

Definitions

NameContent
TorusDirac3.dirac3 mTx + Ay + Az + m • eps
TorusDirac3.wave3 u v wthe wave u^x v^y w^z; for u, v, w ∈ {i, −i} (4 divides every size) the corners (±π/2)³
OpenDirac.staggerthe sign σ with σ T_d = −T_d σ on every open axis
TorusFiberDirac.diracTx + Ay + Az + Mw on ZMod a × ZMod b × ZMod c × ZMod 3; Mw is the hop around the fibre with the sign (−1)^(x+y+z)
speed limitr(m) = √(1 + m²) − |m|, the root of r² + 2|m| r = 1

Results

StatementNameStatus
T_x, A_y, A_z, ε pairwise anticommuteTorusDirac3.Tx_Ay, TorusDirac3.Tx_Az, TorusDirac3.Ay_Az, TorusDirac3.eps_TxLean
D_m² = T_x² + T_y² + T_z² + m²TorusDirac3.dirac3_sqLean
D_m e_{uvw} = m e_{−u,−v,−w}; for m = 0 the eight doublers are zero modesTorusDirac3.dirac3_waveLean
the open cube: σT_d = −T_dσ, D_m² for every sizeOpenDirac.stagger_mul_Td, OpenDirac.dirac_sqLean
eigenvalues of T° on a ring: cos(2πm/d)TorusSpectrum.eq_cos_of_eigenvectorLean

Mass gap and speed limit

StatementNameStatus
any Hilbert space: D = A + B, A, B symmetric and anticommuting, ‖Bχ‖ ≥ |m| ‖χ‖ ⇒ every eigenvalue has |E| ≥ |m|DiracSpeed.norm_sq_add_of_anticomm, DiracSpeed.abs_energy_geLean
… and every unit eigenvector has |⟨V⟩| ≤ r = √(1 + m²) − |m|, with no condition on A²DiracSpeed.abs_velocity_leLean
r = 1/φ at |m| = ½, √2 − 1 at |m| = 1; m = sinh θ ⇒ r = e^{−θ}, and sinh(log φ) = ½DiracSpeed.speedLimit_half, DiracSpeed.speedLimit_one, DiracSpeed.speedLimit_sinh, DiracSpeed.sinh_log_goldenRatioLean
one closed axis with mass m: |⟨K⟩| ≤ √(1 + m²) − |m| < 1TorusUniverse.abs_velocity_le_of_diracLean
the limit is reached only at cos²k = |m| r (= 1/(2φ) at m = ½); every speed 0 ≤ t ≤ r has its stateDiracQubit.eq_of_velocity_eq_speedLimit, DiracQubit.velocity_speedState_paramLean
T³ × w: D₄² = T_x² + T_y² + T_z² + T°_w² (even sizes)TorusFiberDirac.dirac_sqLean
the fibre is a mass: D(ψ ⊗ v) = (D_λ ψ) ⊗ v when T°_w v = λ v; λ = 1 on the uniform mode, −½ on the two rotating onesTorusFiberDirac.dirac_tensor, FiberDirac.Tc_uniform, FiberDiracAxis.transport_rotatingLean
mass gap: every eigenvalue has |E| ≥ ½, on the fibred box and on T³ × w, for every stateFiberDirac.abs_energy_ge, TorusFiberDirac.abs_energy_geLean
the doublers reach the gap: in the rotating mode a pair of opposite doublers has E = −½TorusFiberDirac.dirac_doublersLean
speed limit on T³ × w: every unit eigenvector moves at most at 1/φ along x, y and zTorusFiberDirac.abs_velocity_le_inv_goldenRatio_axesLean
the 1/φ of minimum uncertainty on H₄ is this limit: r = ρ⁻¹ ↔ ρ − ρ⁻¹ = 2m, and ρ₄ − ρ₄⁻¹ = 2·½DiracSpeed.speedLimit_eq_inv_iff, MinUncertaintyFiber.isGreatest_minUncertaintyTensionLean
the index count of the doublers (Nielsen–Ninomiya); the limit on T³ with a mass on all three axes; cos²k = 1/(2φ) is the momentum of no finite ring—open

Four topologies

R³T³fibred boxT³ × w
D²OpenDirac.dirac_sqTorusDirac3.dirac3_sqFiberDirac.dirac_sqTorusFiberDirac.dirac_sq
massa parameter ma parameter mthe fibre: 1 and ½the fibre: 1 and ½
mass gap——|E| ≥ ½ FiberDirac.abs_energy_ge|E| ≥ ½ TorusFiberDirac.abs_energy_ge; the doublers reach it
speed limitnone: on an open axis K² + T² ≠ 1one axis: √(1 + m²) − |m| TorusUniverse.abs_velocity_le_of_diracnone: the axes are open1/φ on x, y, z TorusFiberDirac.abs_velocity_le_inv_goldenRatio_axes
links of a positionone axis at a time SiteEventsTopologies.openCube_linkFlow_eq_zerosix SiteEventsTopologies.rate_torusbox and fibre SiteEventsTopologies.rate_boxeight TorusFiberDirac.rate_torusFiber

The fibre gives a mass on both fibred spaces; only where the axes are closed does the mass become a speed limit.

Figure

The torus: the hopping state

size |Ψ|² · colour phase

The spectral star

⟨cos⟩ on each axis, spread of the cosine

The eight doublers, spectral side: hopping, Dirac and their sum

follows the torus, the mode and Ψ(s) above · drag any panel to turn all

Everything here is the torus above, at the same time: its modes, the occupied mode (○), Ψ(s) (●, at ⟨cos⟩ on each axis, at ⟨cos²⟩ in the squares) and the turn. Every mode (a, b, c) of the torus sits at (cos θa, cos θb, cos θc) in the cube of cosines. The hopping E = −2t Σ cos vanishes on a whole plane, Σ cos = 0. With the Kogut–Susskind signs the three axes anticommute and the energy becomes a length, E = ±√(cos²θa + cos²θb + cos²θc + m²): it vanishes at one point only, the origin, where the eight doublers (±π/2)³ sit. The square root turns the zero plane of the hopping into the zero point of Dirac. Below, their sum: in the squares (cos², cos², cos²) the Dirac energy squared is the sum of the three axes, D² = Tx² + Ty² + Tz² + m². The fibre of 3 positions gives the mass ½ (TorusFiberDirac.dirac_tensor): the origin opens into the gap |E| ≥ ½.

Hopping: E = −2t Σ cos, zero on a plane

Dirac: E = ±√(Σ cos² + m²), zero at one point

Sum: the squares, E² − m² = cos² + cos² + cos²

Lean (nrs3-tritoro): TorusDirac3.dirac3_sq (Dm² = Tx² + Ty² + Tz² + m² on T³, even sizes), the anticommutations Tx_Ay, Tx_Az, Ay_Az, eps_Tx, eps_Ay, eps_Az, and dirac3_wave (the eight waves (±i)x(±i)y(±i)z are zero modes of D₀, and the mass sends each to the opposite corner). The spectrum of each ring is the Lean TorusSpectrum.eq_cos_of_eigenvector. The fibre as fourth axis is TorusFiberDirac.dirac_sq; its rotating modes give the mass ½ and the gap (TorusFiberDirac.dirac_doublers, TorusFiberDirac.abs_energy_ge).

The mass gap and the speed limit

One closed axis at momentum k: the transport is cos k, the energy E = ±√(cos²k + m²) and the velocity of each eigenstate is the slope of its band. No eigenvalue enters |E| < m, and no slope exceeds r = √(1 + m²) − m; the orange points reach it, at cos²k = m r. Move over a panel to follow one state. On T³ × w the same 1/φ holds on each axis for every eigenvector.

The hopping band of every ring

Each ring of d positions has hopping eigenvalues −2t cos(2πm/d), m = 0, …, d − 1. They fill [−2|t|, 2|t|] and touch both ends: m = 0 gives −2t, and for even d the alternating mode gives +2t. ○ the occupied mode · ● ⟨H⟩ of Ψ(s), with the spread σH. At s = 0 the state is one site and ⟨H⟩ = 0 with the spread open. At s = 1 the dot sits on the mode and the spread closes. Press Tour to stay on one torus, Hop to pause.

The octahedron of the band

drag to turn · dashed: the band edge

Put a vertex at ±1 on every axis: that octahedron is the whole cosine band, |λ| ≤ 1 on each ring, the same bound for every size (TorusSpeed.abs_energy_le_one). The inner octahedron has vertices at the occupied |cos(2πm/d)|. On the canonical 3 × 3 × 3 the modes are 1 and −1/2, so a single axis occupies either the outer vertex or 1/2. The star page draws δ, the unresolved share. This octahedron draws the resolved spectrum.

cos on x, y, z–
E = −2t Σ cos–
|E| / (6|t|)–
σH of the torus–

Energy spread against position spread

σH against σP, one panel per axis

The complement of the tension plot. As s runs from the site to the mode, σH falls and σP rises. At s = 1 the mode is an eigenvector of H, so σH = 0 and the position fills the ring. At s = 0 the site is an eigenvector of P, so σP = 0 and the energy fills the neighbours. The product stays positive in between: concentrating one observable opens the other.

family–
mode (mx, my, mz)–
E at the mode–
the complement–
axispositionsmcos(2πm/d) ε = −2t cos⟨H⟩(s)σH(s)σP(s)

The torus, the spectral star and the doubler panels are computed in the browser; the fibre mass ½ is the Lean value; the speed panel draws the formulas of the table.

← B6Theorem atlasB8 →